COWBOY FIRE PIT GRILL - 23"

User Guide

REMOVING THE GLASS GLOBE
Follow the steps below to clean or replace the Glass Globe on your Railroad Lantern.

  1. Unscrew and remove Screw Cap (B) and Rubber Gasket (C).
  2. Lift Handle (A) and Metal Hood (D) directly up from Center Rod.
  3. Unscrew Hex Nut (E) from both threaded segments of Center Rod.
  4. Remove Water Shroud (F). Water shroud is removed by lifting directly up from Center Rod. You may need a flat tool to help leverage the Water Shroud off of LED Module.
  5. Disconnect Wiring Connector (H)  from LED Module (I) by pulling up. Insert wire into the hole on the side of Center Rod.
  6. Lift LED Module (I) up from Center Rod. Once removed, safely set LED Module upside-down on a flat surface to prevent damaging LEDs.
  7. Remove Glass Globe (J).

GRILL GRATE SETUP OPTIONS
The grill grate can be set up in two variations.

  1. Fire Pit Track
    • Simply rest the grill grate on the fire pit track.
  2. Upright Pole
    • Place the upright pole into the pole mount. Secure the pole through the bottom of the mount with the wing bolt. Slide the grill grate on to the pole and tighten the locking handle at the desired height..

ASSEMBLY OPTIONS

Fire Pit

The fire pit bowl comes with three legs. Attach the legs to the base of the bowl. Fire pit stands 14.5” tall.

Fire Pit Track

Place the grill grate on the fire pit track. Easily guide the grill grate on the track to maneuver around the fire.

Upright Pole

Place the upright pole into the pole mount on the fire bowl and secure with wing bolt. Easily move from cooking to warming.